Last week we examined together the causes of water sedimentation in the pipe. This week we want to explain to you the methods of solving this issue in the field of plumbing in Toronto.
Problems occurred in the building due to water sedimentation in the pipe
It is necessary to find the cause of water deposition in the pipes due to the problems observed in the structure of the building’s piping system. The accumulation of sediments left by the passage of water along the path of the pipes is associated with defects similar to the following in the connections made.
- Clogging of hot water pipes is associated with problems such as slow water pressure. In addition to this, the loss of hot water due to contact with sediments on the way to the engine houses leads to a drop in efficiency and poor performance of the building’s heating systems.
- The sediment collected in the pipes leading to the thermal tanks creates a greater need for heating energy to heat the water, and from this energy consumption and corresponding costs increase.
- Over time, sedimentation of faucets leads to failure and breakage of the main hot water pipes and the need to replace and repair parts.
- Defects caused by water deposits in the pipe are not limited to clogging of hot water pipes and over time lead to water pollution with harmful mineral salts and inappropriate effects on health and hygiene.
After getting acquainted with the cause of water sedimentation in the pipe and the problems caused by the long-term existence of these sediments in hot and cold water pipes, the methods of descaling and removing sediment from the pipes are introduced as follows.
Methods of descaling inside faucets
In the past, de-scalding of pipes was associated with many problems, such as the long process of cleaning pipes from sediment and the adverse effect of pouring acid into the sewage well and functional materials on people’s health. Today, the manufacturing of functional equipment and cleaning materials carries out sediment removal with the lowest percentage of risk to people’s health.
Descaling and clogging removal system with electric pulse
Installing the electric pulse system (Impulse Technology) is one of the most modern and effective methods of removing deposits in construction pipes. The electric pulse device can be used on all types of water transmission pipes and the electric pulses created by this device can be used to pulverize sediments and pass them through the pipe path.
Pipe descaling using electrical purification technology
One of the newest methods of removing deposits from pipes is to remove their clogging with the method and technology of electrical purification. The use of magnetic field design in the construction of the electric pulse device prevents the accumulation of sediments in the pipes.
The absorption of hard ions in this magnetic field leads to the dissolution of sediments in water and their passage through the pipe. This device is silent and it is very practical to remove sedimentation of pipes in the building.
Pipe descaling solution
Today, many solutions can be found that are able to remove deposits from hot water pipes. Easy to use, reasonable price, high durability, no negative effects on pipes and human health, etc. are some of the positive features of using chemical solutions to remove deposits from pipes.
Pipe descaling solutions are produced and used with the aim of dissolving these materials collected in the pipe wall. When using these solutions, pay attention to the type of descaling of plastic pipes and other types of pipes.
Reasonable price, high durability of their effect on pipe sedimentation, not having bad effects on human health and destructive on the structure of pipes are some of the prominent features of all types of pipe sediment removal solutions. Miter is a common descaler solution that is used to remove pipe clogging, mantle sediment, and hot water pipes scaling.