Welcome to NUTech Plumbing Company.

Eliminate clogged pipes at home

Eliminate clogged pipes at home

Pipes are always clogged and in this article we will teach you some simple methods to remove clogged sewer pipes, clogged kitchen sinks, clogged toilets and clogged Iranian toilets.

Of course, try these methods, and if you can not open the pipes, contact NUtech Plumbing to send a skilled service technician anywhere in Toronto within half an hour.

Step 1 – Clean the filter

A plastic or metal filter is usually placed at the beginning of the pipe inlet to prevent objects from entering the pipe. The same smoothness is taken by hair, fat, soap and so on. You first get linoleum gloves and clean this strainer. It is effective in relieving clogged pipes at home.

The kitchen sink strainer may be tightened with screws. In this case, open the screw with a screwdriver and then clean the filter.

Well now, turn on the water. Are the pipes clogged? No ? Now let’s go to step 2.

Step 2 – Use a hand pump

If there is water around the outlet of the pipe, do not do anything. Otherwise, open the water to fill the water to a height of about 10-15 cm. Then take the hand pump and repeat about 1 time with pressure. Removing clogged pipes in your home with this method may be solved.

We hope the pipes open. If not, let’s go to the third step.

Step 3 – Use boiling water and baking soda and vinegar and a little washing powder


First, pour a kettle of boiling water into the tube. If the blockage is due to fat and oil, it can be opened with this method. If it does not open, add two tablespoons of baking soda and two tablespoons of washing powder. Now pour a glass of boiling water into the tube and pour a glass of vinegar.

Wait half an hour. Then pour a kettle of boiling water. Most likely the pipe is open. Not yet? So let’s go to the next step.

Step 4 – Using wire


Now bring a wire. (Thin kebab skewer or clothes hanger wire can be provided if you throw it in the trash later). Shape the end of the wire into a small hook. Now gently (again: gently) twist the wire inside the tube. Be careful not to damage the pipe. Do it only once. What better if it opened. And if the pipes are still blocked, contact us for plumbing in Toronto.

Leave A Comment

Your email address will not be published. Required fields are marked *