Eliminating the fungus and mold in the bathroom and toilet is one of the constant challenges of most people, and fortunately there are different methods for it. But it is important that, as much as possible, after cleaning the bathroom and toilet ceramic tiles, you do not create the conditions for mold growth again. In the following, we will introduce and examine some of the practical ways to clean fungus and mold from the bathroom and toilet and ways to prevent their regrowth.
Eliminate fungus and mold in the bathroom and toilet forever!
The humid environment of the bathroom and toilet and the presence of small and large pores between the seams of tiles and walls, around faucets and the floor and ceiling bring all the conditions needed for the growth of fungus and mold. For this reason, dark spots along with a very bad smell in the bathroom are felt to be the annoying fungi and molds. Considering that fungus and mold lead to skin and respiratory diseases, for this reason, they should be eliminated as soon as possible. But the best thing is to eliminate the traces and effects of any fungus and mold in the bathroom and sanitary ware forever. For this purpose, it is better to consider the following points:
After using the bathroom and toilet, be sure to turn on the ventilation system so that the moisture is completely dry.
By leaving the window of the bathroom and toilet open, not only the humidity is lost, but also the outside light prevents the growth of fungus. Fungus and mold grow faster in dark environments.
Always wash and disinfect all parts with suitable detergents after bathing and using the toilet.
Dry the surface of the faucet with a clean towel. These surfaces are one of the best places for the growth of fungus and mold.
Ways to eliminate fungus and mold in the bathroom and sanitary ware
Despite the above-mentioned measures, fungus and mold may grow on the ceramic tile surface of the bathroom and toilet. In this case, you can completely eliminate them with one of the following methods:
1- Clean bathroom mold with white vinegar
One of the best and easiest ways to clean the bathroom and toilet and remove fungus and mold is to use white vinegar. White vinegar has a very high antiseptic power and can eliminate fungi and molds from different surfaces in a short period of time. Just mix water and white vinegar in equal proportions. Then spray this solution on the fungus and mold between the tile and ceramic joints, ceiling and wall, floor and faucets. After about 15 minutes, clean the tiles with a brush to remove dark and black stains. Finally, wash all parts with water and turn on the door and window with the preparation to dry the tiles quickly.