When the water in the sewage well rises, one of the sewer pipes in your building or house is blocked. In such a situation, sewage can enter the hall of the house and make everything dirty. This often causes damage to your floor, walls, pipes and appliances. So, it’s better to call a company which is expert in the field of plumbing in Toronto.
A simple way to prevent this disaster that is sewage back up into your home is to identify sewer pipe blockages before they become catastrophic, but to do this effectively you must first know the cause. That way, you can eliminate the clog before it becomes a major concern.
What is a sewer line and what happens if it gets blocked?
Each house has its own sub-plumbing that conveys toilet, kitchen, bathroom, etc. sewage to the well or municipal sewer (ego) through the main or common pipe, which is called the sewer line or main pipe.
One of the easy ways to detect a clogged sewer line is to pay attention to the draining speed of your appliances. A clog in the sewer line will cause them to drain slowly or not at all. Other signs to look out for include an overpowering sewer odor, drain noise (like gurgling), and backflow from the toilet when flushing.
What is the reason for raising the sewage well?
Clogged pipes in your home
Sometimes the best explanation is the simplest. If your sewer pipe is clogged, it is most likely that one of the sub-pipes inside your house has a problem. The overflow of the sewage well can occur gradually or suddenly, eventually blocking the flow of water in the pipe and causing many problems.
The most common causes of sewage wells are:
- Bathroom waste such as soap
- Kitchen and food waste
- Pouring too much fat and oil in the pipe
- Pouring hair into the pipe
- Low slope of the pipe
- Remaining dirt, sand in the pipe
- Bug in trap
- Pouring building materials into the pipe
- Throwing paper towels in the Iranian or foreign toilet (one of the main causes of the toilet drain)
The main causes of overflowing sewage wells are the above. If you make sure that these materials are not poured into the sewer pipes, you will not have clogging problems for years!
Tree roots
Large trees and shrubs in your yard instinctively seek underground water sources to survive dry seasons. The nearest source of water is often your sewer pipe, especially if it’s near a tree or shrub. It takes time, but eventually the roots can penetrate the sewer pipe at its connection and cause blockage or severe damage. This problem mostly happens in old houses with old pipes. The same thing can be the cause of sewage backflow.